Paper Machine Roll Manufacturer, Paper Machine Roll Exporter

(HT- Expander Roll)

Expander Roll For Paper Machine

Price: 2000 USD ($)/Piece

Expander rolls are suitable for all spreading applications in pulp and paper processes. Spreader rolls can be used for removing wrinkles from sheet and fabric, to correct tension profiles, and in slitters-winders to prevent interweaving of slit sheets.

Send Inquiry

Request To Call Back

(HT-Vacuum Suction Press Roll)

Vacuum Suction Press Roll

Price: 2000 USD ($)/Piece

The main feature of the vacuum press roll is that there are many through holes with smaller diameters on the roll shell. The through holes pass through the lining layer and the body layer, and the inner cavity of the roll shell maintains a continuous vacuum during operation. The function of the vacuum degree of the inner cavity of the vacuum press roll is to force the water squeezed out of the nip to pass through the felt, through the through holes on the vacuum roll, and enter the inner cavity of the roll shell. This process takes a certain amount of time. The higher the vacuum degree of the vacuum roller vacuum area, the shorter the time. In the same time, more water will be sucked out, and the paper will be dehydrated more, that is, the dehydration capacity of the vacuum roller the stronger.

Send Inquiry

Request To Call Back

(HT-Breast Roll)

Breast Roll For Paper Mill

Price: 2000 USD ($)/Piece

The breast rolls are used in the forming section of a Paper Machine, immediately after the head box. It is the first roll on the paper machine,the beginning of the forming section, are mainly used for the forming section driving and dewatering.

Send Inquiry

Request To Call Back

(HT-Guide Roll)

Guide Roll For Paper Mill

Price: 2000 USD ($)/Piece

The guide roll is a common component in papermaking, and it plays the role of supporting thewire, wetfelt, and dryerfeltduring operation.

Send Inquiry

Request To Call Back

(HT-Grooved Press Roll )

Grooved Press Roll

Price: 2000 USD ($)/Piece

Grooved rolls are commonly used on press roll in the paper making process. The open areas in these rolls are designed to accept water from the fabric. It is important all the water in these rolls be evacuated before the nip to prevent re-wetting the sheet and to ensure optimum press nip performance.

Send Inquiry

Request To Call Back

(HT-Artifical Stone Roll)

Artifical Stone Roll

Price: 2000 USD ($)/Piece

Artifical stone roll is used for quickly dewatering the press section of paper machine and adds the physical properties of paper. Material is natural marble roll body, carbon steel shaft head, and surface polishing treatment.

Send Inquiry

Request To Call Back

(HT-Blind Drilled Press Roll)

Blind Drilled Press Roll

Price: 2000 USD ($)/Piece

A large number of holes with a certain depth are drilled on the surface of the press roller. The depth of the holes is best to use two or three different sizes of depth and the same arrangement. The bottom of the hole is not connected to the atmosphere or vacuum, so it is called a blind hole.

Send Inquiry

Request To Call Back

(HT-Dandy Roll)

Dandy Roll For Paper Machine

Price: 10000 USD ($)/Piece

Huatao dandy roll systems are efficient formers to improve paper uniformity; reduce the difference between the two sides of the paper, enhanced paper physical characteristics. Mainly used in the fourdrinier machine (paper machine speed < 700m/min), with a small investment but be very effective. It is easy for installation and operation. Mostly used in printing and writing paper, special paper, cardboard etc.

Send Inquiry

Request To Call Back

(HT-Combination Roll)

Combination Roll For Paper Machine

Price: 2000.00 - 10000.00 USD ($)/Piece

The combination roll is a commonly used dehydration part on the paper machine, and a large amount of water is evenly arranged on the surface. Hole, in the process of paper processing and production, it is necessary to use a composite roller to remove the moisture in the pulp.

Send Inquiry

Request To Call Back

(HT-1)

Vaccum Suction Couch Roll

Price: 10000.00 - 20000.00 USD ($)/Piece

The vacuum couch roll is located at the end of the wire section of the paper machine. Its structure is basically the same as that of the suction roll. It is composed of a roll body, a vacuum box, a bearing seat on the operating side and the transmission side,a water spray tube, an air cushion tube, a rubber wheel, and a vacuum regulating valve.

Send Inquiry

Request To Call Back

(HT-2)

Vaccum Transfer Roll

Price: 2000.00 - 10000.00 USD ($)/Piece

The main feature of the vacuum transfer roll is that there are many through holes with smaller diameters on the roll shell. The through holes pass through the lining layer and the body layer, and the inner cavity of the roll shell maintains a continuous vacuum during operation. The function of the vacuum degree of the inner cavity of the vacuum press roll is to force the water squeezed out of the nip to pass through the felt, through the through holes on the vacuum roll, and enter the inner cavity of the roll shell. This process takes a certain amount of time. The higher the vacuum degree of the vacuum roller vacuum area, the shorter the time. In the same time, more water will be sucked out, and the paper will be dehydrated more, that is, the dehydration capacity of the vacuum roller the stronger.

Send Inquiry

Request To Call Back

(HT-9)

Banana Roll For Paper Machine

Price: 2000.00 - 5000.00 USD ($)/Piece

Banana rolls are suitable for all spreading applications in pulp and paper processes. Spreader rolls can be used for removing wrinkles from sheet and fabric, to correct tension profiles, and in slitters-winders to prevent interweaving of slit sheets.

Send Inquiry

Request To Call Back

(HT-10)

Bow Roll For Paper Mill

Price: 2000.00 - 5000.00 USD ($)/Piece

Bow rolls are suitable for all spreading applications in pulp and paper processes. Spreader rolls can be used for removing wrinkles from sheet and fabric, to correct tension profiles, and in slitters-winders to prevent interweaving of slit sheets.

Send Inquiry

Request To Call Back

(HT-11)

Spreader Roll For Paper Mill

Price: 2000.00 - 5000.00 USD ($)/Piece

Spreader rolls are suitable for all spreading applications in pulp and paper processes. Spreader rolls can be used for removing wrinkles from sheet and fabric, to correct tension profiles, and in slitters-winders to prevent interweaving of slit sheets.

Send Inquiry

Request To Call Back