Auto Splicer For Corrugated Cardboard Production Line
Description of Auto Splicer
The Auto Splicer is a central element for smooth, continuous operation, fast, and helps to increase production output and save production cost during the corrugated cardboard production process.
Technical parameters of Auto Splicer
Design Speed: 380 m/min(Flute liner)250m/min(Top liner)
Paper Connection: overlap connecting
Design Width: maximum can reach 2550mm
Weight of the original paper: 50g/m2 to 350g/m2
Gas Source: a minimum of 0.6MPa dry clean air source
Power Demand: 380V, 50Hz, 20A control
Paper frame brake: pneumatic brake/ magnetic powder brake
Features of Auto Splicer
1. No paper tail connecting, reduce the loss of the base paper (the overlap of the base paper is about 40mm width).
2. When the paper truck remove, automatically transferred out,vacuum-adsorbed, easy to operate, and fully automatic tension control, paper-connecting zero error.
3. All adopt PLC automatic control.
4. When the buffer wheel pulls for the first time, it's easy to pull and aligned automatically.
5. Collecting paper controlled by a cylinder, will not cause broken tile and blistering problems.